Giant Electronics Ltd 2G4DSS24NS3 ユーザーズマニュアル
22
OLYMPIA OL2410 Owner's Manual
6.6 Making Internal Calls
In order to carry out internal calls, more than one handset must be registered on
the same base station.
1) Press the key.
the same base station.
1) Press the key.
2) Press the number of the required handset or ‘*’ key to page all handsets.
1...4 *
OR
Press the UP/DOWN key to select the desired handset(s) in the menu, then
press PHONE or PROG.
OR
Press the UP/DOWN key to select the desired handset(s) in the menu, then
press PHONE or PROG.
,
/
3) End the call by placing the handset in the cradle or pressing the PHONE key.
Note: If an external call is received during an internal call, a short acoustic
signal is issued.
signal is issued.
6.7 Call Toggling
If a portable is engaged in an external connection, it is possible to put the
external call on hold and establish an internal call in the same way as the
previous section ‘Making internal calls’.
Then the display will become as below if handset #1 is selected.
external call on hold and establish an internal call in the same way as the
previous section ‘Making internal calls’.
Then the display will become as below if handset #1 is selected.
TALK 1:35:06
HANDSET #1 H
HANDSET #1 H
The 'H' in the right hand side of the third line indicates having the external call
on hold.
on hold.
It is possible to toggle between an internal call and external call by pressing the
key.
key.
PDF created with FinePrint pdfFactory trial version