Giant Electronics Ltd 2G4DSSL2400 ユーザーズマニュアル

7.1.1  Caller ID Review

1) Press ▼ while handset is in standby (idle) mode.

OR
Press PROG, to enter the menu at standby and then…

2) Press PROG once again, to enter  Call log menu.

3) Scroll through the call log entries using ▲and ▼.

4) Dial the displayed CID record by pressing PHONE.

OR
5) Exit CID review mode by pressing CANCEL.

Remarks:

1.  If the call log is full, the oldest entry is deleted to make room for the new call. If the call log is empty when the user tries to

enter to Call log review, a message ‘CALL LOG EMPTY’ is displayed.

2.  ‘!’-character in the right hand side of the second line indicates that the call has not previously been reviewed. The ‘!’-character

is cleared when stepping to the next entry in the log or when leaving the call log. The maximum length of the name shown in
the second line is 16 characters. If the name is longer, it is right truncated.

3.  A number in the right hand side of the third line shows the call log number - 1 is the latest received call. The maximum length

of the number shown in the third line is 16 characters. If the number is longer, it is left truncated.

4.  The incoming calls are sorted by the order of arrival; the latest is shown first. A number is only contained once in the list. A

new call from a caller that is already contained in the log removes the old entry and inserts the new call. All calls with blocked
number are stored as individual calls.

7.1.2  Storing Caller ID Records

During caller ID review:
1) Scroll through the calls log using ▲and ▼.

2) Press PROG to select the record to be stored.

You can edit the name and number as needed.
3) Press PROG to confirm storage.

NOTE:  If you attempt to store a CID record without name, an error tone will sound, and user will be required to enter a name.

7.1.3  Erasing CID Records