Behavior Tech Computer Corporation MS6309URF3 ユーザーズマニュアル

BTC , EMPREX 

Wireless Keybaord +Mouse + USB dongle   

 

 

 

   

             

 

Front view of           Back view of   
USB connector         USB connector 
 
 

 
 
 

 

1. Plug the dongle receiver connector into your available USB port on 

PC. 

2. Make sure the batteries of the keyboard and mouse are installed 

correctly. Please follow the polarity signs in the battery compartment.

3. Please make sure the power switch on the back of the mouse is 

switched to “on” before using the mouse. When not in use, please 

turn the power switch to “off” for power saving. 

1M and press any key to pair ID. If it can’t work, please follow the 

steps below to process the ID pairing procedure. The ID-recognition 

function helps to protect against interference from other RF products in 

the same environment. Remember to follow the steps below to 

 ID pairing procedures: 

1. Press and hold the ID pairing/connect button on the top of the dongle 

receiver at least 5 seconds until the receiver LED flashes. The 
receiver LED will flash 60 seconds to wait for keyboard and mouse 
pairing information. (If you release the button within 5 seconds, 
the ID doesn’t make any changes.) 

2. Hold the keyboard and mouse close to the dongle receiver within 1M.
3. Press and hold the keyboard ID pairing/connect button on the bottom 

of the keyboard at least 5 seconds until the keyboard LED, which is 
on the upper right of the keyboard, flashes once. (If you release the 
button within 5 seconds, the ID pairing will fail.) 

4. Press and hold the mouse ID pairing/connect button on the bottom of 

the mouse at least 5 seconds until the battery low indicator flashes 
once.  (If you release the button within 5 seconds, the ID pairing 
will fail.) 

Note: 
-  Each procedure should be completed within 60 seconds. 

-  Make sure your PC 

is on and running when doing the pairing 

procedure. 

-  You don’t have to pair ID again after changing batteries. If it can’t 

work, please follow the steps above to pair ID. 

-  Both the keyboard and mouse can operate freely up to a radius of 

about 10m from the receiver. 

- 

Keyboard battery life is up to 13 months and mouse battery life is up 
to 8 months. It depends on the intensity of usage.

 

                       

 

 
 
 
 
 
 
 
   

 

 

 
 
 
 
 
 
 

             

 

ID pairing/connect button on the top of the
dongle receiver (With a LED indicator
under the ID pairing/connect button) 

Pairing Button 

Power Switch 

ID Pairing /connect button on the
bottom of the mouse 

ID pairing /connect button on the
bottom of the keyboard 

 Available USB port   
 CD-ROM drive (for CD and Video operation)   
 Standard sound card (for CD and Video operation)   
 Microsoft® Internet Explorer 5.0 or later version (for the Internet keys)   

 

Microsoft® Windows® ME, Windows® 2000, Windows® XP or Windows Vista® operating system