Intel AXXRSBBU7 ユーザーズマニュアル
Hardware
Intel® RAID Smart Battery AXXRSBBU7 Technical Product Specification
2.4 Remote Extender Board (REB)
The REB component is designed to mount to the base controller through the board-to-board
connector J2, as a daughter card to the base controller. The REB provides a 20-pin remote
battery connector J1 for remote battery installation support.
connector J2, as a daughter card to the base controller. The REB provides a 20-pin remote
battery connector J1 for remote battery installation support.
Figure 3. Remote Extender Board
2.5 Remote Battery Connecting Cables
The AXXRSBBU7 supports remote connectivity to a RAID controller via a 20 pin cable.
Remotely connecting the battery to some RAID controllers may also require the use of the
Remote Extender Board (REB). To remotely connect the Intel
Remotely connecting the battery to some RAID controllers may also require the use of the
Remote Extender Board (REB). To remotely connect the Intel
®
RAID Smart Battery
AXXRSBBU7 to a RAID controller, connect the 20-pin cable to J2 on the battery and the other
end of the cable to the REB J1 connector, or to a 20 pin connector on the RAID controller if
available. If using a REB, the REB should then be mounted as a daughter card to the RAID
controller through the J2 connector on the REB.
end of the cable to the REB J1 connector, or to a 20 pin connector on the RAID controller if
available. If using a REB, the REB should then be mounted as a daughter card to the RAID
controller through the J2 connector on the REB.
Table 3. Cable Compatibility
Intel® RAID Controller or Server System
20-inch Cable
Intel
®
RAID Controller RS2BL080
X (Requires
REB)
REB)
Intel
®
RAID Controller RS2BL040
X (Requires
REB)
REB)
Intel
®
RAID Controller RS2PI008
X
Table 4. Interface Connector Pin-out
Pin
Signal Name
Signal Type
1 +12
V
Input
2 GND
GND
3 SPARE
N/A
4 GND
GND
5
VREG_DDR (1.8 V / 2.5 V)
Input
Revision
1.0
Intel order number E70473-001
6