CALAMP WIRELESS NETWORKS INC. 1409193000 ユーザーズマニュアル

Molded Base Antennas

These antennas feature a rugged molded polymer base, plated spring-loaded 
contact pin and .100” diameter stainless steel whip for long-lasting, trouble-
free operation. Models are available with open or closed coil rod, and can be 
ordered in all black fi nish. This series offers models for many types of wireless 
applications, including WiFi and WiMAX mobility, VHF and UHF land mobile 
radio, 700 Public Safety, 800 MHz and 900 MHz digital radio and AMPS/PCS 
voice/data support.

•  Molded polymer base provides ruggedness and durability in harsh mobile 

environments. 

•  Wideband performance (Wi-Fi and WiMAX models) provide coverage of 2.2 

GHz to 2.9 GHz frequencies without tuning. WiMAX model covers 2.3-3.8 
GHz frequencies.

•  3 dB or 5 dB models available for most frequency ranges
•  Most models available in bright chrome or black fi nish
•  Antenna is ready to install; no rod cutting is required (unless otherwise 

noted)

•  Designed to mate with all 1-1/8”-18 thread mounts, including 3/4” mounts
•  Spring-loaded gold plated contact pin

200 watts(VHF models)
150 watts (UHF models)
100 watts (all other models)

Polarization: Vertical
Nominal Impedance: 50 ohms
VSWR at Resonance: 

< 1.5:1 (Most models, except as noted below)
< 1.9:1 (MAX7635S only)
< 2.0:1 [(B)MAX150/450(S) and (B)MAX140/440(S)]

.100” OD stainless steel; bright (MAXC) or black fi nish (BMAXC)
.062” diameter black stainless steel

Spring: Stainless steel; bright or black fi nish (not all options available with every model)
Base Coil Housing: Molded polymer with a plated insert ring and a spring-loaded contact pin
Phasing Coil Housing:

Molded polymer jacket with copper, nickel and chrome plated bushing

Rod Ferrule: 5/16” -24 thread; bright or black chrome plated fi nish
Mount Method: Mates with all 1-1/8”-18 thread mounts, including 3/4” mounts

PCTEL, Inc.     

WEB: www.antenna.com