CALAMP WIRELESS NETWORKS INC. BDD4T85-2 ユーザーズマニュアル

Paragon-III Technical Manual

The Power Amp front panel and indicators are:

•

  Supply LED - is lit when DC power is ap-

plied.

•

  Low Forward Power LED - is lit when for-

ward power is below the level set, normally
80% of nominal forward power.

•

  High Reverse Power LED - is lit when high

reverse power is detected (e.g. VSWR= 3:1).

•

  Power - sets the PA output power:

- 

UHF models: 20 - 100 Watts

- 

800 model: 20-70 Watts

The speaker panel is fitted with a four-

Ω

 speaker.

Both series of radio assemblies share the same front panel fitted with an
RJ11 connector. This connector is used to allow programming the radio
from the front of the unit via a programming lead. This feature is exclu-
sive to the Series II modules.
If the speaker panel needs to be removed, a mirror programming port
connector is provided on the backplane.

®

S p eaker  Panel

programm ing

p ort

R X2

R X1

O FF

SP EAK ER

SELE CT  SWI TCH

Not

Used with

800 MHz

Series I

model

®

Power Amplifier

Lo w Forward Power

Supply

High Rev ers e Powe r

Power

Supply

LED

Low Forward

Power LED

High Reverse

Power LED

Power

Adjustment