CALAMP WIRELESS NETWORKS INC. BDP3-CRE700 ユーザーズマニュアル
120 20194-102
Paragon3 – 700/800MHz User Manual
29
4.7.3.4 Setup
(Advanced)
► IP Services Setup
Figure 28 - Advanced IP Configuration – IP Services Setup
Server
DHCP Server Disabled, Enabled (Default). The Dynamic Host Configuration Pro-
tocol provides a framework for passing configuration information
E.g.: IP address to Hosts (i.e. PC/RTU) on a TCP/IP network.
tocol provides a framework for passing configuration information
E.g.: IP address to Hosts (i.e. PC/RTU) on a TCP/IP network.
Gateway
Gateway address handed out by the DHCP Server to the DHCP Client. The default
value is set to the IP address of the Ethernet 2 interface. If the gateway is set to
0.0.0.0, no gateway address will be handed out by the DHCP Server.
value is set to the IP address of the Ethernet 2 interface. If the gateway is set to
0.0.0.0, no gateway address will be handed out by the DHCP Server.
Lease Start Address
Pool of addresses allocated for DHCP purpose. If a unit is configured as DHCP
Server, this field represents the start IP address pool managed by the DHCP
Server. Normally, Paragon3 automatically calculates the Lease Start Address
(equal to Ethernet IP Address plus one).
Server, this field represents the start IP address pool managed by the DHCP
Server. Normally, Paragon3 automatically calculates the Lease Start Address
(equal to Ethernet IP Address plus one).
Lease Duration
The period over which the IP Address allocated to a DHCP client is referred to as
a “lease”. Lease Duration is the amount entered in minutes.
A value of “0” indicates an infinite lease.
a “lease”. Lease Duration is the amount entered in minutes.
A value of “0” indicates an infinite lease.
Maximum number of leases
Maximum number of DHCP client(s) a unit can serve.
IPSD
I/P Services Delivery – Disabled (Default), Enabled.
Allows or disallows the generation of locally provided IP Services such as online
diagnostics, alarms, etc…
Allows or disallows the generation of locally provided IP Services such as online
diagnostics, alarms, etc…
NAT (ETH2 only)
Network Address Translation - Disabled, Enabled (Default)
NAT technology is a method by which IP addresses are mapped from one ad-
dress space to another. In Paragon3, it is normally used on the WAN side of an IP
network to hide local IP addresses from an external IP network (i.e. Internet).
NAT technology is a method by which IP addresses are mapped from one ad-
dress space to another. In Paragon3, it is normally used on the WAN side of an IP
network to hide local IP addresses from an external IP network (i.e. Internet).
RIPV2 (ETH1 only)
Router Information Protocol v2 - Disabled, Enabled (Default)
RIPv2 is a dynamic IP routing protocol based on the distance vector algorithm
and is only used in Router mode.
RIPv2 is a dynamic IP routing protocol based on the distance vector algorithm
and is only used in Router mode.