Crestron Electronics Inc TSW-560 ユーザーズマニュアル
3. Reach into the universal mounting bracket and push the rear half back to ensure it is fully
behind the mounting surface. Ensure the front of the universal mounting bracket is level. Then,
tighten the two screws to complete the installation.
CAUTION: To avoid damage to the bracket, do not overtighten the screws.
tighten the two screws to complete the installation.
CAUTION: To avoid damage to the bracket, do not overtighten the screws.
Qty
Product
Color
Part Number
Items for TSW-560 Only
1 Latch, Security
4525305
1 Bracket, Universal Mounting
4525127
1 Bracket, Pre-Construction
4524592
Items for TSW-760 and TSW-1060 Only
1 Bracket, Mounting
4525352
1 Latch, Security
4525305
4 Screw, 6-32 x 3/4", Undercut Head, Phillips
2033247
4 Screw, M3 x 16 mm, Flat Head, Phillips
2013788
DO Install the TSW-760 or TSW-1060 Mounting Bracket
The Crestron TSW-760 and TSW-1060 install over a standard 2-gang or 3-gang U.S. electrical box, a 2-
gang European electrical box, or a 2-gang U.K. electrical box. The touch screens can also be attached
directly to drywall and other surfaces over the front of a 2-3/8" (60 mm) high by 3-3/8" (86 mm) wide
cutout. When installed, the touch screen protrudes 1/2" (13 mm) from the mounting surface,
eliminating any visible screws.
To mount the TSW-760 or TSW-1060 into an electrical box, use four of the eight included screws (four 6-
32 x 3/4" or four M3 x 16 mm screws) to attach the mounting bracket to the electrical box, as shown in
the following illustrations.
NOTE: For U.S.-style installations, use a #2 Philliips screwdriver. For European-style installations, use a
#1 Phillips screwdriver or equivalent.
For U.S.-style installations, use the 6-32 x 3/4" screws.