Crestron Electronics Inc TSW-760 ユーザーズマニュアル
TSW-560/TSW-760/TSW-1060
5-Inch, 7-Inch, and 10.1-Inch Touch Screens
DO Install the TSW-560 Mounting Bracket
The Crestron® TSW-560 can be mounted into drywall and other surfaces, or it can be mounted onto a
wall stud. When mounted into drywall and other surfaces, the touch screen protrudes 1/2" (13 mm)
from the mounting surface.
To mount the TSW-560, use the following procedure:
5-Inch, 7-Inch, and 10.1-Inch Touch Screens
DO Install the TSW-560 Mounting Bracket
The Crestron® TSW-560 can be mounted into drywall and other surfaces, or it can be mounted onto a
wall stud. When mounted into drywall and other surfaces, the touch screen protrudes 1/2" (13 mm)
from the mounting surface.
To mount the TSW-560, use the following procedure:
1. For preconstruction applications, use standard drywall nails or screws to attach the included
preconstruction mounting bracket to a wall stud.
CAUTION: Allow an air gap of at least 12" (305 mm) in the wall cavity above and below the TSW-560 for
heat dissipation.
For postconstruction applications, use the preconstruction bracket as a cutout template by turning the
bracket to face the wall, ensuring it is level, and temporarily tacking it to the wall with finishing nails (not
included) in the smaller holes around the cutout opening. Trace the cutout opening with an appropriate
drywall saw (not included).
heat dissipation.
For postconstruction applications, use the preconstruction bracket as a cutout template by turning the
bracket to face the wall, ensuring it is level, and temporarily tacking it to the wall with finishing nails (not
included) in the smaller holes around the cutout opening. Trace the cutout opening with an appropriate
drywall saw (not included).
2. Loosen the two screws on the included universal mounting bracket, and then install the
universal mounting bracket bottom first into the opening.