Kinpo Electronics Inc A200A ユーザーズマニュアル
4
ADSL State - displays the current status of the modem. These states are: Listening
Connected, Connecting, and Disconnected.
Protocol - The protocol section displays which ADSL standard is being used.
Transmit /Receive Rate - In the Transmit and Receive section, the user will be able to
see what kind of line rate is being achieved for both upstream and downstream line
rates.
Connected, Connecting, and Disconnected.
Protocol - The protocol section displays which ADSL standard is being used.
Transmit /Receive Rate - In the Transmit and Receive section, the user will be able to
see what kind of line rate is being achieved for both upstream and downstream line
rates.
ADSL Statistics Menu
From this menu, the user will be able to see ADSL Information, ATM Transmission
statistics, ATM Receive statistics and ADSL Connection Information.
ADSL Information
Re_training - The number of times handshaking has occurred.
FEC Count - The number of forward error correction accumulated during showtime.
CRC - The number of cyclic redundancy check (CRC) errors during showtime. The
count will be reset to zero after the next handshaking. During showtime, the receiver
keeps checking the CRC check sum for each received superframe. If there is a
mismatch between the received check sum and the locally calculated check sum, a
CRC error has occurred.
ATM HEC - The number of ATM header error check (HEC) errors accumulated during
showtime. The count will be reset to zero after the next handshaking. After entering
showtime, the ATM TC layer at the reciever will undergo a cell delineation hunting
process by finding the header of each received ATM cell. After successfully finding the
cell delineation, the ATM TC layer will keeps checking the HEC check sum for each
received ATM cell. If there is a mismatch between the received check sum and the
locally calculated check sum, an ATM HEC error has occurred.