Ione RFSCORPIUSN2TU ユーザーズマニュアル

back 5 seconds. For DVD, play the previous chapter. 

Forward 

Speed up currently playing media 

Rewind 

Rewind currently playing media 

Mute 

Mute the sound.    Press again to resume the sound 

Volume up   

Turn volume up 

Volume down  Turn volume down 
Right button 

Same as right button of mouse. Please press it to wake up the 
optical trackball, if the trackball is in power-down mode 

Left button 

Same as left button of mouse. Please press it to wake up the 
optical trackball, if the trackball is in power-down mode 

 
ID Setting 

The product has been pre-set in ID for radio frequency and the keyboard and 
dongle receiver are already paired. It is not necessary to do the ID setting when you 
use Scorpius-N2T for the first time. However, in case it needs to re-set the 
connection ID, please follow the process below for the ID setting. 

 
Step 1: Plug the dongle receiver into your computer. For the best performance, please 

plug the dongle receiver into the front USB port of your computer, or use a 
USB extension cable to place the dongle receiver 20cm away from monitor, 
speaker, power supply, USB hub and other RF interference sources. 

Step 2: Press the connect button on the dongle receiver. The LED will start to blink. 
Step 3: Within 8 seconds, please press the connect button on the bottom of the 

Wireless Keyboard. 

 

Step 4: The LED on the dongle receiver will blink very fast for 3 seconds. This means 

that ID setting is completed.   

       
Note: If the Wireless Keyboard does not work properly, please go back to step 2. 
 
Reminder: For optimal performance, please place the dongle receiver 20cm away 
from other RF interference devices such as computer monitors and speakers. 
 
Now, Enjoy and Have a Fun!!!