Digital Security Controls Ltd. 12GS3125 ユーザーズマニュアル
60
GSM/GPRS Alarm Communicators
SMS dialer (GS-3125 series only)
In SMS dialer operating mode, one or more telephone numbers (the first 8 entries in the phonebook) are sent SMS messages
(as programmed previously) corresponding to the following events (see table below):
(as programmed previously) corresponding to the following events (see table below):
Alarm indications which may occur on one or more of the 3 programmable input lines. Bear in mind that 2 SMS messages
can be programmed for each of the 3 input lines on the device, one for Activation and one for Resetting.
PSTN line test. 2 SMS messages may be programmed: one for PSTN line absence and one for Resetting.
Power supply voltage test. 2 SMS messages may be programmed: one indicating Power supply voltage problems and
Power supply voltage test. 2 SMS messages may be programmed: one indicating Power supply voltage problems and
one for Resetting.
Periodic SMS message, with a programmable time period between 1 hour and 1 year.
An SMS message is transmitted when one of the above events occurs, for which an SMS message and at least
one telephone number has been programmed.
one telephone number has been programmed.
Voice dialer (GS-3125 series only)
During operation in Voice dialer mode, one or more telephone numbers (the first 8 entries in the phonebook) are sent a pre-
recorded voice message. Up to 8 messages may be recorded, each with a maximum duration of 16 seconds. Each message
is recorded onto a solid state memory, thereby eliminating all problems linked to the use of magnetic tape, such as the
deterioration of message quality over time; the jamming of mechanical systems after extended periods of inactivity, etc. The
messages are linked to the following events (see table below):
recorded voice message. Up to 8 messages may be recorded, each with a maximum duration of 16 seconds. Each message
is recorded onto a solid state memory, thereby eliminating all problems linked to the use of magnetic tape, such as the
deterioration of message quality over time; the jamming of mechanical systems after extended periods of inactivity, etc. The
messages are linked to the following events (see table below):
No.
Event description
Programmed telephone numbers
(first 8 entries in the phonebook)
SMS message
1
2
3
4
5
6
7
8
1
Input 1 Event
*SMS string
2
Input 1 Restore
*SMS string
3
Input 2 Event
*SMS string
4
Input 2 Restore
*SMS string
5
Input 3 Event
*SMS string
6
Input 3 Restore
*SMS string
7
PSTN Fault Event
8
PSTN Fault Restore
*SMS string
9
Mains Fault Event
10
Mains Fault Restore
*SMS string
11
Periodic SMS
*SMS string
Event disabled on telephone number
Event enabled on telephone number
Event enabled on telephone number
* The SMS string may be up to 100 characters long
No.
Event description
Programmed telephone numbers
(first 8 entries in the phonebook)
Mess. #1 Mess. #2 Mess. #3
1
2
3
4
5
6
7
8
1
Input 1 Event
2
Input 1 Restore
Voice
Message 1
Voice
Message 2
3
Input 2 Event
4
Input 2 Restore
Voice
Message 2
5
Input 3 Event
6
Input 3 Restore
7
PSTN Fault Event
8
PSTN Fault Restore
9
Mains Fault Event
10
Mains Fault Restore
11
Periodic Call
Event disabled on telephone number
Event enabled on telephone number
Event enabled on telephone number