Digital Security Controls Ltd. 16LT7090 ユーザーズマニュアル
Chapter 10.0 Safety Instructions
10.1 Regular Maintenance and Troubleshooting
Keep your Alarm Controller in optimal condition by following all the instructions that are included
within this manual and/or marked on the product. It is the end-user and/or installer’s responsibility
to ensure that the disposal of the used batteries is made according to the waste recovery and recyc-
ling regulations applicable to the intended market.
within this manual and/or marked on the product. It is the end-user and/or installer’s responsibility
to ensure that the disposal of the used batteries is made according to the waste recovery and recyc-
ling regulations applicable to the intended market.
10.2 Cleaning and Maintenance
l
Clean the units by wiping with a damp cloth only.
l
Do not wipe the front cover with alcohol.
l
Do not use any water or any other liquid.
l
Do not use abrasives, thinners, solvents or aerosol cleaners (spray polish) that may enter
through holes in the Alarm Controller and cause damage.
l
Use the system test described in “Testing Your System” to check the battery condition.
We recommend, however, that the standby batteries be replaced every 3-5 years.
We recommend, however, that the standby batteries be replaced every 3-5 years.
l
For other system devices such as smoke detectors, passive infrared, ultrasonic or
microwave motion detectors or glass break detectors, consult the manufacturer’s literature
for testing and maintenance instructions.
microwave motion detectors or glass break detectors, consult the manufacturer’s literature
for testing and maintenance instructions.
- 23 -