ADC Telecommunications Inc. FWM0801A ユーザーズマニュアル
Page 56
FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 5 - microBTS Initial Configuration
2
Using the configuration screen, type in the following information as shown in
Table 5-1
E
Table 5-1: Configuration Parameters
Parameter
Variable
microBTS Address
Use an IP address assigned by your system
administrator
administrator
Subnet Mask
Use an IP address assigned by your system
administrator
administrator
Gateway
Use an IP address assigned by your system
administrator
administrator
nanoBTS 1
Use an IP address assigned by your system
administrator
administrator
nanoBTS 2
Use an IP address assigned by your system
administrator
administrator
Primary OML (operations and maintenance link) 1
Use the IP address assigned to the Abis link on which
your BSC is operating
your BSC is operating
Primary OML (operations and maintenance link) 2
Use the IP address assigned to the Abis link on which
your BSC is operating a secondary link
your BSC is operating a secondary link
Use DHCP
This is selected when a DHCP address needs to be
assigned to the microBTS.
assigned to the microBTS.
Make sure that this is not selected if you are assigning
static IP addresses
static IP addresses