Buffalo 09101912-0 ユーザーズマニュアル
16
11
17
14
13
15
10
9
12
Chapter 1 Product Overview
11
Back Panel
9
Router Switch
Switches router mode between enabled, disabled, and auto.
On:
Switches router mode between enabled, disabled, and auto.
On:
Router functionality is enabled (router mode).
Off:
Router functionality is disabled (bridge/AP
mode).
mode).
Auto:
This switches between modes automatically
based on whether or not another router is
detected on the Internet port. The default setting
for this switch is Auto.
based on whether or not another router is
detected on the Internet port. The default setting
for this switch is Auto.
10
USB Eject Button
To dismount a USB hard drive, hold down this button until
the USB LED flashes (about 3 seconds). The USB drive can
then be unplugged safely.
To dismount a USB hard drive, hold down this button until
the USB LED flashes (about 3 seconds). The USB drive can
then be unplugged safely.
11
USB LED (Green)
On:
On:
The USB disk is connected.
Off:
The USB drive can be removed or no USB drive is
connected.
connected.
Flashing: Overcurrent detected.
Note: When this LED is blinking, the connected USB drive
Note: When this LED is blinking, the connected USB drive
cannot be used. Remove the connected USB drive. If
the LED continues to blink even after the USB drive is
removed, restart the AirStation.
the LED continues to blink even after the USB drive is
removed, restart the AirStation.
Do not remove the USB drive or turn off the
AirStation while the USB LED is on.
AirStation while the USB LED is on.
12
USB Port
Connect the USB drive.
13
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports.
This switching hub supports 10 Mbps,100 Mbps, and 1000 Mbps
connections.
This switching hub supports 10 Mbps,100 Mbps, and 1000 Mbps
connections.
14
LAN LED (Green)
On:
On:
An Ethernet device is connected.
Flashing:
An Ethernet device is communicating.