Buffalo 09101938-0 ユーザーズマニュアル
Chapter 5 Connect to a Wireless Network
WCR-G300 / WCR-HP-G300 User Manual
81
1
Click on the
network icon in the system tray
.
2
Select the target AirStation’s name and click
[Connect]. If you will be connecting to this
device in the future, checking [Connect
automatically] is recommended.
[Connect]. If you will be connecting to this
device in the future, checking [Connect
automatically] is recommended.
Other Devices (e.g. Game Console)
If you are using a game machine which supports AOSS or WPS, refer to that device’s manual to initi-
ate AOSS/WPS. When instructed, hold down the AOSS button on the AirStation for 1 second.
ate AOSS/WPS. When instructed, hold down the AOSS button on the AirStation for 1 second.
When the Security LED on the front of the AirStation stop flashing and glows steadily, the connec-
tion is complete.
tion is complete.
Manual Setup
You can also connect to the AirStation without installing Client Manager V or Client Manager 3 by
using the utility built-in to Windows. The procedure varies depending on which version of Windows
you are using.
using the utility built-in to Windows. The procedure varies depending on which version of Windows
you are using.
Note: · If the AirNavigator CD is used to perform setup when making the initial settings of AirStation, the wire-
less connection settings for the AirStation are completed during the Setup process. As a result, you do
not need to make the settings below. After setup is complete, once the LAN cable is removed, you can
connect from your wireless client to the AirStation.
not need to make the settings below. After setup is complete, once the LAN cable is removed, you can
connect from your wireless client to the AirStation.
· Before performing setup, make the settings to enable the wireless client of the computer.
Windows 7 (WLAN AutoConfig)
With Windows 7, use WLAN AutoConfig to connect to the AirStation.