Buffalo 000000010 ユーザーズマニュアル
1
2
3
5
4
- 6 -
Chapter 1 Product Overview
Hardware Overview
Front Panel LEDs
1
AOSS button
To initiate AOSS, hold down this button until the wireless LED l ashes
(about 1 second). Then, push or click the AOSS button on your wireless
client device to complete the connection. Both devices must be powered
on for this to work.
(about 1 second). Then, push or click the AOSS button on your wireless
client device to complete the connection. Both devices must be powered
on for this to work.
2
Power/Diag LED (Green or Red)
On (Green):
Power is on.
Of :
Power is of .
On (Green)
*1
:
Booting.
2 blinks (Red)
*2
:
Flash ROM error.
3 blinks (Red)
*2
:
Wired Ethernet LAN error.
4 blinks (Red)
*2
:
Wireless LAN error.
5 blinks (Red)
*3
:
IP address setting error.
9 blinks (Red)
*2
:
System error.