Buffalo 000000011 ユーザーズマニュアル
8
10
7
6
9
- 8 -
Chapter 1 Product Overview
Back Panel
6
Router Switch
On:
Router functionality is enabled (router mode).
Of :
Router functionality is disabled (bridge/AP mode).
Auto:
This switches between modes automatically based on whether or not
another router is detected on the Internet port. The default setting for
this switch is Auto.
another router is detected on the Internet port. The default setting for
this switch is Auto.
7
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports.
This switching hub supports 10 Mbps and 100 Mbps connections.
This switching hub supports 10 Mbps and 100 Mbps connections.
8
Internet Port
10 Mbps and 100 Mbps connections are supported.
Note: In bridge/AP mode (router of ), the Internet port becomes a
Note: In bridge/AP mode (router of ), the Internet port becomes a
regular LAN port, for a total of 5 usable LAN ports.
9
Reset button
To reset all settings, hold down this button until the Power LED turns red
(about 3 seconds). The power must be on for this to work.
(about 3 seconds). The power must be on for this to work.
10
DC connector
Connect the included AC adapter here.