Buffalo 000000026 ユーザーズマニュアル
The following notice is only for EU and Middle East region.
Only use the cables and accessories that are included in the package. Don't use other
accessories or cables unless specifically instructed to in the documentation.
accessories or cables unless specifically instructed to in the documentation.
EU Declaration of Conformity
Buffalo Inc. hereby declares that this WZR-450HP2D is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted at
www.buffalo-technology.com/declaration-of-conformity.
requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted at
www.buffalo-technology.com/declaration-of-conformity.
Environmental Information
• The equipment that you have purchased has required the extraction and use of
natural resources for its production.
• The equipment may contain hazardous substances that could impact health and the
environment.
• In order to avoid the dissemination of those substances in our environment and to
diminish the pressure on the natural resources, we encourage you to use the
appropriate take-back systems.
appropriate take-back systems.
• The take-back systems will reuse or recycle most of the materials of your end of life
equipment in a sound way.
• The crossed-out wheeled bin symbol invites you to use those systems.
• If you need more information on the collection, reuse and recycling
• If you need more information on the collection, reuse and recycling
systems, please contact your local or regional waste administration.
Regulatory Compliance Information
AT
FR
IT
ES
BE
DE
LU
SE
DK
GR
NL
GB
FI
IE
PT
CY
CZ
EE
HU
LV
MT
PL
LT
SK
SI
Note: This device is also
authorized for use in the
following EFTA member
states: CH, IS, NO, LI
authorized for use in the
following EFTA member
states: CH, IS, NO, LI
BG
RO
HR
TR
The following notice is only for US region.
Only use the cables and accessories that are included in the package. Don't use other
accessories or cables unless specifically instructed to in the documentation. Any
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
accessories or cables unless specifically instructed to in the documentation. Any
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
Company Information
Buffalo Americas, Inc.
11100 Metric Blvd., Suite 750, Austin, Texas 78758 USA
+1-512-349-1500
11100 Metric Blvd., Suite 750, Austin, Texas 78758 USA
+1-512-349-1500
35020642-01