Taicom Data Systems Co Ltd AWL1000G ユーザーズマニュアル
User mode: Under the Single User mode, the DHCP server only allocates one IP address to a
local PC. Under the Multiple User mode (default), the DHCP server allocates the IP addresses
specified by the DHCP address pool.
Save Configuration: Clicking this will link you to the Save Settings / Reboot page.
local PC. Under the Multiple User mode (default), the DHCP server allocates the IP addresses
specified by the DHCP address pool.
Save Configuration: Clicking this will link you to the Save Settings / Reboot page.
5.3.2 Ethernet Mode Setting
The Ethernet Mode configuration page allows you to set the LAN port into the following modes:
AutoSense (default): The Router will automatically sense which mode to use, selecting
between 100 Mbps Full Duplex, 100 Mbps Half Duplex, 10 Mbps Full Duplex, and 10
Mbps Half Duplex.
Mbps Half Duplex.
100 Mbps Full Duplex: Data can be transferred and received simultaneously at the transfer
rate of 100 Mega-bits per second.
100 Mbps Half Duplex: Data cannot be transferred and received at the same time. For
example, data can be sent, and once the transmission is complete, data can be received. This
is done at a transfer rate of 100 Mega-bits per second.
is done at a transfer rate of 100 Mega-bits per second.
10 Mbps Full Duplex: Data can be transferred and received simultaneously at the transfer
rate of 10 Mega-bits per second.
10 Mbps Half Duplex: Data cannot be transferred and received at the same time. For
example, data can be sent, and once the transmission is complete, data can be received. This
is done at a transfer rate of 10 Mega-bits per second.
is done at a transfer rate of 10 Mega-bits per second.
16