Taicom Data Systems Co Ltd AWL1000G ユーザーズマニュアル
5.7 Bridge Filtering
Bridge Filtering allows packets to be forwarded or blocked, depending on the MAC address. The
Bridge Filtering configuration page allows you to set the configuration of MAC filtering. There
can be up to 4 different Bridge Filtering configurations.
Bridge Filtering configuration page allows you to set the configuration of MAC filtering. There
can be up to 4 different Bridge Filtering configurations.
Source MAC: This is the Source MAC to block or from which to forward. See the next page for
instructions on how to configure this. The Source MAC must consist of 12 hexadecimal
characters.
Destination MAC: This is the Destination MAC to block or to forward to. See the next page for
instructions on how to configure this. The Destination MAC must consist of 12 hexadecimal
characters.
Type: Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets. For
example, 0800 is for IP protocol. The Type must consist of 4 hexadecimal characters.
Block: When block is selected, everything from the Source MAC with destination Destination
MAC will be blocked.
Forward: When forward is selected, everything from the Source MAC will be forwarded to the
Destination MAC.
How do I block packets from MAC address 000002fa6fab through IP protocol?
Answer: First go to the Bridge Filtering page under Configuration. Then type 000002fa6fab in
the ID Source MAC field and 0800 in the Type field. If bridge filtering is not already enabled,
select Yes under the Enable Bridge Filtering field. Then select Block and click Submit.
26