Lg Electronics LGC800W ユーザーズマニュアル

1) The Battery pack is keyed so it can only fit one way. Align the groove in the battery pack with the rail on the

back of the phone until the battery pack rests flush with the back of the phone.

2) Slide the battery pack forward until you hear a “click”, which locks the battery in place.

1) Plug the charger into a wall outlet. The charger can be operated from either a 110V or a 220V source. When

AC power is connected to the desktop charger, both the green and red LED’s blink once.

2) Insert the phone with the installed battery pack or a spare battery pack into the individual battery pack slot.

Red light indicates battery is being charged.. Green light indicates battry is fully charged.

In order to reduce echo sound when using the Hands-Free Kit, make sure that the speaker and microphone are not

facing each other and keep microphone a generous distance from the speaker.

  

Choose an appropriate flat surface where the unit will not interface with driver’s movement or passenger’s

comfort. The driver/user should be able to access the phone with ease. Using the four self-tapping screws

provided, mount the supplied braket on the selected area. Then with the four machine screws provided, mount the

counterpart on the reverse side of the reverse side of the cradle. Secure the two brackets firmly together by using

the two bracket joint screws provide. The distance between the cradle and the interface box must not exceed the

length of the main cable.

Choose an appropriate flat surface ( somewhere under the dash on the passenger side is preferred ) and mount the

IB bracket with the four self-tapping screws provided. Clip the IB into the IB bracket.

Install the microphone either by cliiping I onto the sunvisor (driver’s side) or by attaching it to door post

(driver’s side), using a velcno adhesive tape (not included).