TransCore 05767 ユーザーズマニュアル

Metallized Windshields: Some vehicle windshields contain a metallic treatment that could prevent an interior 
windshield-mounted tag from working correctly. If you have a vehicle with a metalized windshield, contact your 
local customer service center for more information. If your vehicle’s metalized windshield has a metal-free zone, it 
is typically located near the rearview mirror.

Metal-Free Zone: Some vehicle metalized windshields have a metal-free zone. If your windshield has this zone, 
center the tag in that area and follow the installation instructions listed on this page.

Tinted Windshields: Some vehicles have a metallic tint across the top of the windshield that might interfere with 
reading the tag. If your windshield has this metallic tint, install the tag at least 2 inches (5.1 cm) below the tinted 
area. Nonmetallic tint does not affect performance.

Metal Sun Visors: Some vehicles have an exterior-mounted sun visor that might interfere with reading the tag. If 
your vehicle has this visor, mount the tag at least 2 inches (5.1 cm) below the visor.

GoAnywhere Pass

Optional suction-cup bracket (sold separately)

Commercial glass cleaner and paper towels

The GoAnywhere Pass may be mounted to the interior windshield with 3M™ Dual Lock™ strips, or with an 
optional bracket that attaches the tag to the windshield with suction cups. 

To install the Tag
1.

Choose the location for your tag (

). The tag should be mounted approximately 1 inch (2.54 cm) below 

the rearview mirror post.

2.

Clean and dry the interior windshield surface completely before affixing the fastener strips. The windshield 
temperature must be at least 68ºF (20ºC) for optimum bonding.

Installation Instructions

 for the GoAnywhere Pass

TM

16-8899-001 Rev X2 11/13