Twinhead International Corporation E14A ユーザーズマニュアル
Using the BIOS Setup Utility — Navigating and Entering Information in BIOS
Navigating and Entering Information in BIOS
Use the following keys to move between fields and to enter information:
Key Function
Del
Press Del to start the BIOS utility after
turning on the computer.
turning on the computer.
ESC
Press Esc to exit any section. If you wish to
exit the BIOS utility
exit the BIOS utility
without
saving changes,
go to the main menu, then press Esc.
Up, down keys (
ÇÈ)
Push the up and down arrow keys to move
among selections, then press Enter to make
a selection.
among selections, then press Enter to make
a selection.
+ or -
Use the +, - keys to modify a field. Use + to
increase a value, such as a date or number,
and - to decrease it. For other types of
choices, such as “enabled,” or “disabled,” use
either key to move between choices.
increase a value, such as a date or number,
and - to decrease it. For other types of
choices, such as “enabled,” or “disabled,” use
either key to move between choices.
Tab
Press tab to make a selection
F1 General
Help
F10 Press
F10 to save changes, then exit.
Warning:
After KBC firmware update is complete,
the system will automatically shut down. Please
unplug all power sources (including AC or
battery) and replug, or use a paper clip to
depress the forced shutdown hole on the bottom
of the computer. This will enable new settings
to be entered.
unplug all power sources (including AC or
battery) and replug, or use a paper clip to
depress the forced shutdown hole on the bottom
of the computer. This will enable new settings
to be entered.
55