Twinhead International Corporation F17PT ユーザーズマニュアル

Chapter 2 — Getting Started

touchpad will select the desired item and prompt the software to 
perform the related operation.

4.

The buttons located directly below the touchpad are the same in
function as those on a two-buttoned mouse. Clicking these buttons
makes selections, drags objects, or performs a variety of other
functions depending on the software. To select an object, first move
the pointer over the object you want to select, and then press the
left button one time. The functions of these buttons are software
specific.

5.

Double-clicking is a common technique for selecting objects or
launching programs from icons. Once you have moved the 
pointer over the object you wish to select, rapidly press the left
button two times. This action is commonly referred to as “double-
clicking” an object.

There are two ways to drag:

x

Move the pointer to the desired location then press down the left
button. While still holding down the left button, move the pointer 
to the desired location. Release the button. 

x

Move the pointer to the desired location. Tap the touchpad twice 
quickly as if you were double-clicking, however do not remove
your finger after the second tap. Move the cursor to the desired
location. Lift your finger to finish dragging. 

Adjust the touchpad settings by selecting Settings/Control
Panel/Mouse/Buttons. These settings allow you to change the orientation of 
the touchpad from right-handed to left-handed, and fine tune the pointer
movement and timing of clicks.

The Touchpad is a pressure-sensitive device. If not properly cared for, it 
can be easily damaged. Please take note of the following precautions.

x

Make sure the touchpad does not come into contact with dirt, 
liquids or grease.

x

Do not touch the touchpad if your fingers are dirty.

x

Do not rest heavy objects on the touchpad or the touchpad
buttons.