Twinhead International Corporation F17PT ユーザーズマニュアル

Chapter 2 — Getting Started

Function keys can increase or decrease the brightness of the monitor.

x

<Fn> + <F6> decreases the LCD panel brightness

x

<Fn> + <F7> increases the LCD panel brightness

1.

Click My Computer/Control Panel/Display/Settings. Click the 
Settings tab. The dialog box indicates the monitor resolution.

2.

Use the slide bar to adjust the resolution. Normally, you should
use the resolution the LCD or monitor was designed for.

Using a lower resolution than the screen was 

designed for will reduce the area of the display. 
Using the computer in DOS mode may produce the same 
effect, because it uses a 640 by 480 resolution by 
default. You can stretch these low resolution 
displays to full screen size by selecting either the 
Expanded Display or Display Expansion Mode features 
in the BIOS utility. However, the stretching may 
cause distortion, especially to fonts.

Higher resolution modes may be used, as long as the monitor supports
them.

The notebook has a VGA monitor port to connect your computer to an 
external monitor.

1.

Locate the 15-pin VGA monitor port on the back side of your 
notebook and connect the video signal cable from the external
monitor (or the VGA adapter) to the monitor port.

2.

Connect the power cable from the external monitor to a power
outlet and turn on the monitor.

3.

On your notebook, click the right touchpad button on the
Windows desktop to open the desktop menu. Click Properties to 
open the Display Properties window.

4.

In the Display Properties window, click Advanced in the Settings 
tab. Click the Display Modes tab.