Everspring Industry Co Ltd AC134-2 ユーザーズマニュアル
2
6. The following screen will appear. This means the gateway is entering binding
mode.
7. At this point, insert the batteries into the AC134 and it will automatically bind
with the gateway.
8. The screen below will appear in 10 seconds if the process is successful.
Note: Time-out will occur if the binding process was unsuccessful. Please refer
to the
“Manual Binding” in the Troubleshooting section.
IR Code Learning
The AC134 can now be programmed to learn the IR codes from the
appliance’s
remote control.
1. Plug the device to the AC mains using the DC adaptor and power cable
1. Plug the device to the AC mains using the DC adaptor and power cable
provided while still leaving the batteries inside.
2.
On the Homesys main page, select “IR controller” icon at the top.
3.
In the “DEVICES” tab, click the “+” under “IR Controller”.