Biolase Inc. EPIC-1 ユーザーズマニュアル
EPIC™10 User Manual
pg. 18
5400525 Rev B
LASER
WARNING:
WARNING:
Never point the laser at a person’s eyes.
LASER
WARNING:
WARNING:
Never operate the laser without a fiber tip attached.
LASER
WARNING:
WARNING:
All persons present in the operatory must wear protective eyewear when
the laser is in use.
the laser is in use.
4.2 OPERATION - TURN ON THE EPIC 10 LASER
• Ensure that the battery has enough charge for operation, or connect the power supply
cord to the power connector on the laser console and plug the cord into a wall outlet.
• Turn the Power Switch at the rear of the console to the ON (I) position. The “BIOLASE”
logo screen will appear (Figure 4.1). After three (3) seconds the EPIC “Welcome” screen
will be displayed (Figure 4.2).
will be displayed (Figure 4.2).
Figure 4.1
Figure 4.2
Figure 4.3
• Enter the three digit access code using the touch screen. The Access Key Code is
888
.
(If the incorrect code is entered, an ‘
X
’ appears briefly in the window (Figure 4.3) and then
the screen reverts back to the Welcome screen; re-enter the correct code.)
• The system will go to the HOME screen which identifies two procedure categories to
choose from: Soft Tissue, Whitening.
Figure 4.4: Home Screen
Wireless Signal
Strength Indicator
Laser Console Battery
Strength Indicator
Settings Button