New Bright Industrial Co Ltd GF716U ユーザーズマニュアル
Model / Mod
é
le : GF716U Instruction Manual
Feature Operated by the Controller
This Controller Features 2.4GHz Technology
This Controller Features 2.4GHz Technology
- Race up to 6 boats at the same time
- Longer Range, Faster Response, Internal Antenna
- Combine with automatically syn with boat
- Charge by USB
- Longer Range, Faster Response, Internal Antenna
- Combine with automatically syn with boat
- Charge by USB
1. Forward - push left side lever forward.
2. Reverse - pull left side lever backward.
3. Left and Right - use right side lever.
2. Reverse - pull left side lever backward.
3. Left and Right - use right side lever.
Boat Battery Charging
1. Twist the ON/OFF switch in a clock-wise motion (located on top of boat) to the OFF position, turn three (3) tabs on top of boat and carefully remove
the USB cord storage compartment
2. Slide open the USB cord storage compartment.
3. Connect the USB Charging cord to a powered USB receptacle.
4. While charging, Charging Status Light will be on.
5. Charging Status Light will turn off when charging is complete.
6. When finished charging, unplug USB cord and store in compartmen. Replace compartment cover.
7. Replace top of watercraft and turn three (3) tabs on top of boat to lock into place.
8. Turn the ON/OFF switch in counter clock-wise motion to switch to the ON position. Your water craft is now ready to use.
the USB cord storage compartment
2. Slide open the USB cord storage compartment.
3. Connect the USB Charging cord to a powered USB receptacle.
4. While charging, Charging Status Light will be on.
5. Charging Status Light will turn off when charging is complete.
6. When finished charging, unplug USB cord and store in compartmen. Replace compartment cover.
7. Replace top of watercraft and turn three (3) tabs on top of boat to lock into place.
8. Turn the ON/OFF switch in counter clock-wise motion to switch to the ON position. Your water craft is now ready to use.
Steering Trims:
Sympton - Your watercraft consistently veers to the left or the right.
Solution:
1. Trim adjustment is located on top of boat near back.
2. Adjust trim to align rudder for stright lie driving.
Solution:
1. Trim adjustment is located on top of boat near back.
2. Adjust trim to align rudder for stright lie driving.
Battery Requirement included:
2 "AA" Batteries for Controller
Internal recharging Lithium Ion Battery with USB charging cord
Internal recharging Lithium Ion Battery with USB charging cord