Suncon Toys Industry Ltd 136178R ユーザーズマニュアル
3
DRIVING THE RACER
Warning: Never play with your racer in the street.
Caution: If the vehicle gets stuck under an object, immediately release both
buttons on the transmitter. Then retrieve the vehicle.
1. Slide ON/OFF on the side of the truck to ON. The headlights turn on.
2. Slide L/H (under the rear bumper) to H for driving on smooth surfaces, or
Warning: Never play with your racer in the street.
Caution: If the vehicle gets stuck under an object, immediately release both
buttons on the transmitter. Then retrieve the vehicle.
1. Slide ON/OFF on the side of the truck to ON. The headlights turn on.
2. Slide L/H (under the rear bumper) to H for driving on smooth surfaces, or
to L for driving on rougher surfaces.
3. Use the transmitter’s control levers to drive and steer the truck.
[Illus. — transmitter front view]
Left Control Lever--
•
/
Push forward to move forward.
•
/
Push forward and to the right for turbo speed.
•
/
Pull backward to move backward.
•
/
Release to stop.
Right Control Lever
•
/
Push left to turn left.
•
/
Push right to turn right.
•
/
Release to go straight.
4. When you finish driving the racer, slide ON/OFF to OFF. The headlights
turn off.
HELPFUL HINT
•
/
Running your racer continuously for long periods generates high heat
levels. Heat causes wear and tear on the motor. To help keep heat
levels down, when your racer’s batteries die, let the racer cool at least 10
minutes before installing new batteries.
levels. Heat causes wear and tear on the motor. To help keep heat
levels down, when your racer’s batteries die, let the racer cool at least 10
minutes before installing new batteries.
•
/
If the racer’s motor runs but does not respond to the transmitter, move
closer to the racer and try again.
closer to the racer and try again.
•
/
If someone uses a CB nearby, it might interfere with control of the racer.
If this happens, move the racer away from the CB.
If this happens, move the racer away from the CB.
•
/
You cannot operate your racer near devices with transmitters that use the
same frequency as your racer (27 or 49 MHz). Check the box to see
which frequency you have.
same frequency as your racer (27 or 49 MHz). Check the box to see
which frequency you have.
•
/
If the racer moves slowly and you have installed new batteries, check the
wheel mechanisms for lint, thread, hair, or dust.
wheel mechanisms for lint, thread, hair, or dust.