Psion Inc 7505BTHC25 ユーザーズマニュアル
Chapter 5: Settings
Imager
Imager
166
iKôn Rugged PDA (Windows Mobile 6) User Manual
Constant Illumination
“Constant Illumination” is used to reduce the intrusiveness of the device’s illumination on
the observer. Instead of the illumination turning on and off every time the device attempts a
decode (2-4 times per second), the illumination stays on from the time the trigger is pulled
until a decode is successful. This feature is useful in low light environments, since it will
also reduce the distraction that the illumination can have on nearby coworkers.
“Constant Illumination” is used to reduce the intrusiveness of the device’s illumination on
the observer. Instead of the illumination turning on and off every time the device attempts a
decode (2-4 times per second), the illumination stays on from the time the trigger is pulled
until a decode is successful. This feature is useful in low light environments, since it will
also reduce the distraction that the illumination can have on nearby coworkers.
5.28.3.3 Code 39 Settings
Enabled
Set this parameter to on to enable “Code 39”.
Set this parameter to on to enable “Code 39”.
Field Size/Char
Refer to “Field Size” on page 137 for details.
Refer to “Field Size” on page 137 for details.
5.28.3.4 Code 128 Settings
Enabled
Set this parameter to on to enable “Code 128”.
Set this parameter to on to enable “Code 128”.
Field Size/Char
Refer to “Field Size” on page 137 for details.
Refer to “Field Size” on page 137 for details.
5.28.3.5 EAN 13
Enabled
Set this parameter to on to enable “EAN 13”.
Set this parameter to on to enable “EAN 13”.
Addendum
An addendum is a separate bar code, supplementary to the main bar code.
This parameter provides three options: Disabled, Optional and Required. Depending on the
value chosen for this parameter, an addendum is recognized
or ignored.
•
An addendum is a separate bar code, supplementary to the main bar code.
This parameter provides three options: Disabled, Optional and Required. Depending on the
value chosen for this parameter, an addendum is recognized
or ignored.
•
Double-tap on Addendum to display a dialog box listing your options.
Note: This feature assumes that you have reached an understanding about how the device
operates in your application, and that, after a learning period, operators will get
used to using the imager in one particular way. It also assumes that a trained opera-
tor will usually only have near miss scenarios.