Psion Inc 7505BTHC25 ユーザーズマニュアル

Automatic Network Detection
If a wireless network is available when you switch on your unit, a notification bubble may 
appear letting you know which networks have been found. You can choose a network from 
here.

Tapping on Connect in the softkey bar at the bottom of the screen will automatically connect 
to a network that’s already been set up. Tapping on Settings in the network bubble will 
launch the Wireless Manager applet.
If you prefer not see this notification bubble, you can tap on the Menu button in the softkey 
bar, and choose not to display the notification bubble.

If your unit is equipped with an IrDA end-cap, tapping on Start>Settings and then tapping 
on the Connections tab followed by the Beam icon allows you to enable Receive all incom-
ing beams so that your unit can accept incoming data from other IrDA devices.

Bluetooth is a global standard for wireless connectivity for digital devices and is intended 
for Personal Area Networks (PAN). The technology is based on a short-range radio link that 
operates in the ISM band at 2.4 GHz. When two Bluetooth-equipped devices come within a 
10 meter range of each other, they can establish a connection. Because Bluetooth utilizes a 
radio-based link, it does not require a line-of-sight connection in order to communicate. 
•

Tap on Start>Settings. Next, tap on the Connection tab followed by the Bluetooth 

icon.