Psion Inc LFAH1G2 ユーザーズマニュアル
August 29, 2007
DPD A00285 A20 Sheet 1 of 5
W
ORKABOUT
P
RO
G
2
RFID MODULE HF/LF G2
E
XPANSION
M
ODULE
I
NSTRUCTIONS
Important: All Approval and safety information is outlined in the ‘Workabout pro G2 Handheld-computer
User Manual’ – part number 8100140A
.
This manual is available on our website
www.psionteklogix.com
through the Teknet extranet
Important: The WORKABOUT PRO G2 with the RFID option must not be held closer than 20 cm
from the rest of the body.
Important: The WORKABOUT PRO G2 with the RFID option must not be held closer than 20 cm
from the rest of the body.
This product must not be used in a holster or on a belt-clip.
Easily installable expansion modules for the WORKABOUT PRO G2 allow you to customise this hand-
held to meet your specific mobile computing requirements. This chapter outlines how to install the RFID
Module HF/LF G2.
Before installing a module in the WORKABOUT PRO G2, all power sources must be turned off.
•
Remove the batteries. If your unit is using AC power, disconnect it.
•
Slide the switch to position OFF to shut off internal battery power.
With the power shut down, you can install the RFID Module HF/LF G2.
•
Connect the USB connector on the RFID Module.
•
Slide the PCB guide in the Multi purpose End Cap.
•
Slide the RFID Module in the PCB guide.
•
Screw the stopper.
RFID Module HF-AM1-G2 RFID Module HF-T2-G2
RFID Module LF-AH1-G2