Litemax Electronics Inc. PPS1831 ユーザーズマニュアル
Page 44
6.0 OSD Setting
6.1 Brightness Menu
By pressing the “menu” button, you will see the below picture. Across from timing you will see
resolution, frequency, and V-frequency of the panel. Version shows the firmware control version.
These cannot be altered by the user.
resolution, frequency, and V-frequency of the panel. Version shows the firmware control version.
These cannot be altered by the user.
There are 7 sub menus within the OSD user interface: Brightness, Signal Select, Sound, Color, Image,
Tools, and Exit.
Tools, and Exit.
When you press the “menu” button, you enter the “Brightness” sub directory. In this directory,
you will see 4 selections:
you will see 4 selections:
OSD Brightness:
press ’’right’’ key
Press the “menu” once, to adjust the brightness. Press “left” to dim
down the brightness to “0”, press “right” to increase the brightness to
“100”
down the brightness to “0”, press “right” to increase the brightness to
“100”
Ambient light sensor: Press this Icon for auto dimming. (OPTION) To
use this option, the Litemax ambient light sensor needs to have been
installed
use this option, the Litemax ambient light sensor needs to have been
installed
Potentiometer: Navigate to this icon to adjust the VR function.
Ambient light sensor with OSD offset: To set minimum brightness
level based on ambient light.
level based on ambient light.