Visonic Inc. PWRMAXPLUS ユーザーズマニュアル

DE5467U 

9 

  

To stop the alarm, press 

 and then key in your 

valid user code. 

2.13 Disarming and Stopping Alarms 

Disarming the system stops the siren before it stops 

automatically, irrespective of whether the alarm was 

initiated in the armed or the disarmed state.  
After disarming, different displays may appear, depending 

on the current status of the system: 
A. 

Disarming - no events: After an uneventful armed 

term, the disarming operation will progress as shown: 

 

 y

 

³

 

R E A D Y           H H : M M

☺

 

 y

 

 ARM indicator extinguishes 

B. 

Disarming after alarm, with all zones ready: If 

the zone that alarmed in the armed state is back to 

normal, the disarming operation will progress as shown: 

 

y

 

³

 

R E A D Y           H H : M M  

      (alternating)        

☺

 

 

 y

 

 ARM indicator extinguishes 

  To read the alarm memory, refer to Section 5. The 

"MEMORY"  message  will disappear only upon re- 

arming the system. 

C. 

Disarming after an alarm, with one zone still 

disturbed: If the zone that alarmed in the armed state 

is still disturbed, the disarming operation will progress 

as shown in the following table. 

 

 y

 

³

 

N O T   R E A D Y   H H : M M  

      (alternating)        

☺

 

 

 y

 

 ARM indicator extinguishes 

  To read the alarm memory, refer to Section 5. The 

"MEMORY"  message  will disappear only when you 

rearm the system.  

  If you do not know how to return the disturbed zone to 

normal, consult your installer. 

D. 

Disarming with the system in a state of 

trouble. If trouble is detected in the armed state, the 

TROUBLE indicator on the front panel will light and the 

disarming operation will progress as shown: 

 

 y

 

³

 

R E A D Y           H H : M M  

      (alternating)        

☺

 

 

 y

 

 ARM extinguishes and 

 sounds once per minute 

  To find out what kind of trouble is being sensed, see 

Section 5. The TRBL display will disappear, the 

TROUBLE  indicator will extinguish and the trouble 

beeps will stop upon eliminating the cause for trouble. 

E. 

Disarming after an alarm, with the system in 

a state of trouble. The TROUBLE indicator on the 

front panel will light. If the zone that alarmed while the 

system was in the armed state is back to normal, the 

disarming operation will progress as shown: 

 

 

 y

 

³

 

R E A D Y           H H : M M  

      (alternating)        

      (alternating)        

☺

 

 

 y

 

 ARM extinguishes and 

 sounds once per minute

To find out which zone alarmed and what kind of trouble 

is being sensed, see Section 5. The TRBL display will 

disappear, the TROUBLE  indicator will extinguish and 

the trouble beeps will stop upon eliminating the cause 

for trouble. The MEMORY message will disappear only 

upon rearming the system. 

Disarming under Duress.  If you are forcibly 

compelled to disarm the system, enter the default 

duress code (2580) or another code set by the installer. 

Disarming will take place normally but a silent alarm will 

be transmitted to the central station. 

2.14 Siren Behavior 

Continuously ON when initiated by a burglar zone or a 

24-hour zone, and when a user initiates a “panic alarm”. 
When initiated by a fire zone (smoke is detected) ON - ON - 

ON - pause - ON - ON - ON - pause - ........ and so on. 
If there is nobody around to disarm the system upon alarm 

and a zone remains "open", the siren will sound for the 

time duration set by the installer - then will stop. The strobe 

light keeps flashing until the system is disarmed.  

 

 

3. SPEECH AND SOUND CONTROL  

3.1 Speech & Sound Cont. Push-buttons 

The sound and speech-related functions offered by the 
PowerMax+ are controlled with the keypad, as detailed in 
the following list.  

 

Key 

Function 

  Increasing the loudness of spoken messages  

  Decreasing the loudness of spoken messages  

  disabling the loudspeaker 

  Recording a spoken message for other users of  

the alarm system 

  Listening to a recorded message left by another 

user of the alarm system 

  Enabling / disabling the chime function in chime zones 

3.2 Adjusting the Speech Volume  

The following diagram shows how to increase the loudness 

by clicking the <1> key (assuming that the volume was at 

minimum to begin with).