Visonic Inc. PWRMCOMPLETE ユーザーズマニュアル
USER SETTINGS
26
D-300886
You may now review and select any other mode on
the User menu (by clicking
or
).
Deleting Keyfob
Deleting Keyfob
Deleting Keyfob
Deleting Keyfob
Occupied keyfob memory locations must be cleared
(enrolled ID must be deleted) before enrolling a new
ID. To delete an existing ID, proceed as follows:
(enrolled ID must be deleted) before enrolling a new
ID. To delete an existing ID, proceed as follows:
A. Select the desired memory location, as described
in the previous paragraph, steps A-C. If, for
example, you selected keyfob No. 5, the display
will read:
example, you selected keyfob No. 5, the display
will read:
Keyfob No. 5
B. Click
. The display will change to:
<OFF> to delete
C. Click
. The display will change to:
Keyfob No. 5
Note that the dark box at the far right has
disappeared. It is now possible to enroll a new ID. It
is also possible to leave the cleared zone or memory
location free and simply exit to the main menu.
disappeared. It is now possible to enroll a new ID. It
is also possible to leave the cleared zone or memory
location free and simply exit to the main menu.
Enrolling Proximity Tags (optional)
Enrolling Proximity Tags (optional)
Enrolling Proximity Tags (optional)
Enrolling Proximity Tags (optional)
Valid proximity tags enable you to perform variety of
functions without entering user code, for example,
arming, disarming, reading the event log, etc.
Whenever user code is required, you can simply
present a valid proximity tag instead of entering user
code.
When the system is disarmed, after presenting a
valid proximity tag to the control panel, the message
"<OK> for AWAY" is displayed. Now you can press
the
button to immediately arm the
control panel, or wait for 3 second for system
automatic AWAY arming (the message "Please exit
now" will be displayed). Presenting the proximity tag
once again will DISARM the system.
Instead of pressing the
button (see
above), you can press the
button once
/ twice (the message "<OK> for HOME" / "<OK> for
disarm" is displayed, accordingly) and then press the
press
button for HOME arming /
disarming.
The control panel transmits an RF signal. A valid
proximity tag that is presented to the control panel
transmits a coded RF signal back to the control unit.
The control panel transmits an RF signal. A valid
proximity tag that is presented to the control panel
transmits a coded RF signal back to the control unit.
Up to 8 proximity tags can be enrolled to the PM
PRO.
PRO.
Proximity tag enrolling involves the following steps:
A.
Having entered your Master User Code
successfully (see Entering the User Settings
successfully (see Entering the User Settings
Menu), Click the
button
(repeatedly, if necessary) until the display will
read:
read:
E N R O L L P R O X T A G
B. Click
. The display will read:
T a g N o : 1
C. Click
. The display will prompt you
to initiate a transmission from the chosen tag:
P R E S E N T T A G
D. Present the tag to the control panel left bottom
side. In response, the “Happy Tune” (- - - –––) will
sound and the display will change to:
sound and the display will change to:
T a g N o : 1
A dark box will appear at the far right, indicating that
the chosen tag has been enrolled.
the chosen tag has been enrolled.
E. Click
and enroll the next proximity
tag (2, 3,...8), as described in step D.
F. From this point on, you may continue in several
different directions:
•
If you wish to enroll another tag, select the
desired number by:
desired number by:
- Clicking
to go up
(6
%7%8.....)
- Clicking
to go down (4
%
3
%
2.....)
- Clicking
% <tag#>.
•
To return to the main menu, click
. This
will bring back the display:
< O K > T O E X I T
You may now review and select any other mode on
the User menu (by clicking
or
).
Deleting Proximity Tags
Deleting Proximity Tags
Deleting Proximity Tags
Deleting Proximity Tags
Proximity tag memory locations must be cleared
(enrolled ID must be deleted) before enrolling a new
ID. To delete an existing ID, proceed as follows:
A. Select the desired memory location, as described
(enrolled ID must be deleted) before enrolling a new
ID. To delete an existing ID, proceed as follows:
A. Select the desired memory location, as described
in the previous paragraph, steps A-C. If, for
example, you selected Tag No. 5, the display will
read:
example, you selected Tag No. 5, the display will
read:
T a g N o . 5
B. Click
. The display will change to:
< O F F > T O D E L E T E
C. Click
. The display will change to:
T a g N o . 5