Climax Technology Co Ltd IRS ユーザーズマニュアル
1
D.A.S.P. PET IMMUNE PIR Motion Sensor (IRP-9)
The PIR Pet-Immune Motion Sensor ensures the excellent catch performance of its original purpose in the security sense and in addition,
eliminates unnecessary false alarms caused by those jumpy little loved pets. IRP-9 is designed to detect movements within an assigned area
and signals the Control Panel to activate the alarm if an intruder crosses its’ path of detection but will not detect a dog up to 27 kilos, 10 cats, or
numerous rodents.
eliminates unnecessary false alarms caused by those jumpy little loved pets. IRP-9 is designed to detect movements within an assigned area
and signals the Control Panel to activate the alarm if an intruder crosses its’ path of detection but will not detect a dog up to 27 kilos, 10 cats, or
numerous rodents.
The PIR consists of a two-part design made up of a cover and a base. The cover contains all the electronics and optics and the base provides a
means of fixing. The base has knockouts to allow mounting on either a flat surface or in a corner situation with a triangular bracket for corner
mounting.
Provision for a tamper switch that will be activated when the cover is detached from the base prevents unauthorized access and removal from
the mounting surface. The PIR can also alert you to signal communication problems and low battery situations.
The PIR is designed to give a typical detection range of 12 meters when mounted at 2 meters above ground.
means of fixing. The base has knockouts to allow mounting on either a flat surface or in a corner situation with a triangular bracket for corner
mounting.
Provision for a tamper switch that will be activated when the cover is detached from the base prevents unauthorized access and removal from
the mounting surface. The PIR can also alert you to signal communication problems and low battery situations.
The PIR is designed to give a typical detection range of 12 meters when mounted at 2 meters above ground.
z
z
I
I
d
d
e
e
n
n
t
t
i
i
f
f
y
y
i
i
n
n
g
g
t
t
h
h
e
e
P
P
a
a
r
r
t
t
s
s
1. Test Button aka LED indicator
It is the test button and also doubles as the LED indicator. The test button is used for testing the radio
performance and for learning purpose. The LED indicator is used to indicate the status of system.
performance and for learning purpose. The LED indicator is used to indicate the status of system.
2. Tamper Switch
The Tamper switch protects the enclosure from being opened.
3. Battery Insulator
4. Corner mounting bracket
5. Supervision Enable/Disable Jumper Switch (JP2)
- When the jumper is set as ON, the Supervision is disabled. (Factory default)
- When the jumper is set as OFF, the Supervision is enabled.
6
. Sensitivity Increaser Jumper Switch (JP3)
-If the jumper is ON, the IPR-9/ IPR-9/IRP-A9’s detection sensitivity is high. (Factory default)
- If the jumper is OFF (if the jumper link is removed or “parked” on one pin),
IPR-9/IRP-A9’s detection sensitivity is in normal level.
z
z
S
S
l
l
e
e
e
e
p
p
T
T
i
i
m
m
e
e
r
r
The PIR has a “sleep time” of approximately 1 minute to conserve power. After transmitting a detected
movement, the PIR will not retransmit for 1 minute; any further movement detected during this sleep period will
extend the sleep time by another minute. In this way continuous movement in front of a PIR will not unduly
exhaust the battery.
movement, the PIR will not retransmit for 1 minute; any further movement detected during this sleep period will
extend the sleep time by another minute. In this way continuous movement in front of a PIR will not unduly
exhaust the battery.
z
z
T
T
e
e
s
s
t
t
M
M
o
o
d
d
e
e
The PIR can be put into Test mode by pressing the Test Button aka LED on the front cover. In Test mode, it will disable the sleep timer and
will enable the LED indicator to flash every time a movement is detected. Each time press the Test Button, the PIR will transmit a test
signal to the Control Panel for radio range test and enter the test mode for 3 mins. It will exit Test Mode automatically after 3 mins and
returns to normal mode.
will enable the LED indicator to flash every time a movement is detected. Each time press the Test Button, the PIR will transmit a test
signal to the Control Panel for radio range test and enter the test mode for 3 mins. It will exit Test Mode automatically after 3 mins and
returns to normal mode.
z
z
S
S
u
u
p
p
e
e
r
r
v
v
i
i
s
s
i
i
o
o
n
n
F
F
u
u
n
n
c
c
t
t
i
i
o
o
n
n
When the PIR is in Normal operation mode it will conduct a Self-test Periodically by transmitting a supervisory signal once every 30 to 50
min.If the Control Panel can’t receive the Supervisory signals transmitted from a certain PIR, an “Out-Of-Order” fault message will be
generated.
min.If the Control Panel can’t receive the Supervisory signals transmitted from a certain PIR, an “Out-Of-Order” fault message will be
generated.
z
z
S
S
e
e
n
n
s
s
i
i
t
t
i
i
v
v
i
i
t
t
y
y
I
I
n
n
c
c
r
r
e
e
a
a
s
s
e
e
r
r
F
F
u
u
n
n
c
c
t
t
i
i
o
o
n
n
You can use the sensitivity increaser function to increase the PIR’s detection sensitivity. To increase detection sensitivity, please enable
the Jumper to ON position (default). To maintain the normal detection sensitivity, enable the Jumper to OFF position.
the Jumper to ON position (default). To maintain the normal detection sensitivity, enable the Jumper to OFF position.
z
z
L
L
E
E
D
D
I
I
n
n
d
d
i
i
c
c
a
a
t
t
o
o
r
r
In Normal operation mode, the LED Indicator will not light except in the following situations:
z When the PIR is in low battery condition, every time it transmits a detected movement, the LED will flash for about 2 seconds.
z When the cover is opened and the tamper switch is violated, the LED will light up for 2 sec. to indicate it is transmitting the “Tamper”
z When the PIR is in low battery condition, every time it transmits a detected movement, the LED will flash for about 2 seconds.
z When the cover is opened and the tamper switch is violated, the LED will light up for 2 sec. to indicate it is transmitting the “Tamper”
signal.
z When the Tamper condition persists, every time it transmits a detected movement, the LED will light up.
However, if the PIR is in Test mode, the LED will light up every time a movement is detected.
However, if the PIR is in Test mode, the LED will light up every time a movement is detected.
z
z
B
B
a
a
t
t
t
t
e
e
r
r
y
y
The PIR uses one 3.6 V Lithium battery as its power source. The PIR will have a typical battery life of 3 years at an average of 20
activations a day.
Low battery detection operates where the PIR has enough reserve energy to typically operate for 1 month before complete exhaustion. A
low battery signal will be sent to the Control Panel along with regular signal transmissions for the Control Panel to display the status
accordingly.
activations a day.
Low battery detection operates where the PIR has enough reserve energy to typically operate for 1 month before complete exhaustion. A
low battery signal will be sent to the Control Panel along with regular signal transmissions for the Control Panel to display the status
accordingly.
Jumper On
The jumper link is inserted
connecting the two pins
connecting the two pins
Jumper Off
if the jumper link is removed or “parked”
on one pin.
on one pin.
14-Sept-2010