Climax Technology Co Ltd MX ユーザーズマニュアル
111
z 2X - Help Needed Due to Detected Fire, Smoke, Gas, Carbon
Monoxide or Water Leakage
When fire, smoke, gas, carbon monoxide or water leakage is detected,
SD, CO and WS will be triggered.
z 4X - Crisis of Fire, Smoke, Gas, Carbon Monoxide or Water Leakage
is relieved.
When a crisis of fire, smoke, gas, carbon monoxide or water leakage is
relieved.
z 61 - AC Failure
When the Control Panel’s AC power fails, the green LED blinks twice
every second.
z 62 - AC Power Restored
When AC power is restored to the Control Panel.
z 64 - Control Panel Low on Battery
When the Control Panel is low on battery, the green LED blinks every
2 seconds.
z 65 - Control Panel’s Low Battery Status Cleared
When the Control Panel’s low battery status is cleared.
z 71 - Inactivity
When the Control Panel makes an inactivity timer expired report.
z 72 - No WTR Learnt in
When the Control Panel has no WTR learnt in.
z 8X - Fall Emergency
When Fall Sensor is triggered.
z 91 - Auto Check-in Report
When the Control Panel makes an auto check-in report to the CMS.
z BX - Low Battery (IR/SD/WTR/CO/WS)
When Passive Infrared Motion Detection (IR), Smoke Detector (SD),
Wrist Transmitter (WTR), Carbon Monoxide Detector (CO) or Water
Sensor (WS) is low on battery, the green LED blinks every 2 seconds.
Sensor (WS) is low on battery, the green LED blinks every 2 seconds.
z CX - Low Battery Status Cleared (IR/SD/WTR/CO/WS)
When the low battery status of Passive Infrared Motion Detection (IR),
Smoke Detector (SD), Wrist Transmitter (WTR), Carbon Monoxide
Detector (CO) or Water Sensor (WS) is cleared.
Detector (CO) or Water Sensor (WS) is cleared.
z DX - Fall Inactivity
An inactivity code will be sent to the CMS if there is no movement
during guard time after fall detection.
z EX - Sensor Supervision Failure