Climax Technology Co Ltd SDC1 ユーザーズマニュアル
Slim Door Contact (SDC-1) User Manual
The Slim Door Contact monitors the opening/closing of specified devices (e.g. door or window). The Door Contact is fixed to
the monitored device frame with an actuating magnet fixed to the device. When the door or window opens, the magnet
moves away from the Door Contact, activating an internal magnetic switch causing the Door Contact to transmit alarm signal
to the Control Panel. The device also has the capabilities of communicating signal problems along with low battery situations.
the monitored device frame with an actuating magnet fixed to the device. When the door or window opens, the magnet
moves away from the Door Contact, activating an internal magnetic switch causing the Door Contact to transmit alarm signal
to the Control Panel. The device also has the capabilities of communicating signal problems along with low battery situations.
Identifying the parts
1.
LED Indicator
2.
Learn/Test Button
*(Use a sharp tool such as a paper clip to press the Learn/Test button).
- Press the button to transmit a learn code.
- Press the button once to enter Test Mode for 3 minutes.
3.
Magnet Detection Area
4.
Magnet
- Please refer to Magnet Scope Positioning for how to use the magnet with the Door Contact correctly.
LED Indicator
In Normal operation mode, the LED indicator remains off except in the following situations:
When the Door Contact is activated under Low battery condition.
When the Door Contact is activated and transmitting the signal under the Test mode.
Features
Supervision
The Door Contact will automatically transmit supervision signals to the Control Panel at random intervals of
30 to 50 minutes in Normal Operation Mode.
30 to 50 minutes in Normal Operation Mode.
If the Control Panel has not received the signal from the Door Contact for a preset period time, the Control
Panel will indicate that the Door Contact is experiencing an out-of-signal problem.
Panel will indicate that the Door Contact is experiencing an out-of-signal problem.
Battery
The Door Contact uses a pack of 10 x CR1616 battery as power source
The Door Contact is also capable of detecting low battery condition. When the battery is low, a low battery
signal will be sent to the Control Panel along with regular transmission. The LED will light up when the Door
Contact is activated under low battery status.
signal will be sent to the Control Panel along with regular transmission. The LED will light up when the Door
Contact is activated under low battery status.
<NOTE>
The pre-inserted battery in the Slim Door Contact cannot be replaced or switched out.
Test Mode
The Door Contact can be put into Test mode for 3 minutes by pressing the Learn/Test Button once.
During Test mode, the LED indicator will light up upon triggering.
Each press on the Test Button will lead the Door Contact to transmit a test signal to the Control Panel for
radio range test and reset the test mode to the 3-minute duration.
radio range test and reset the test mode to the 3-minute duration.
The Door Contact will automatically exit Test Mode after the 3-minute duration and return to Normal
Operation mode.
Operation mode.
1