Fimi Srl 802160 ユーザーズマニュアル

12

Xper module

The ProScribe is intended for use as Windows XP embedded powered wireless thin client touch-screen device. 

 

To use   your ProScribe you must have the following;

 

 

● a AC / DC power supply (24Vdc output voltage - 3,42 Adc output current)

 

 

● a wireless access point to access the corporate network or

 

 

● an Ethernet connection in case you plan to use the ProScribe on a fixed location

 

The Windows XP embedded operating system provides you all the convenience to set-up any type of thin-client session  

 

with centrally located applications or web-based services. Before doing so, please make sure to apply the following    

 instructions.

 

 

 

 

 

The ProScribe is pre-configured with a Windows XPe feature called Enhanced Write Filter (EWF) to prevent  

 

 

writing on the CF card. When write protection is activated, all recently installed software products and changed  

 

 

user settings are not stored into the CF and hence are removed after a reboot. The procedure to save such data in  

 

 

the CF card is described hereunder. It is strongly advised to re-enable EWF after disabling it for storing user data.  

 

 

EWF protects the OS but also the CF card itself. 

 

 

 

 

● press “start” button then “Run...” and type “ewfd”

 

 

● the ProScribe will logout and reboot automatically

 

 

● now the CF is write enable, so the modification are really stored into the CF card, meaning that modifications  

 

 

   will be retained on reboot. 

 

 

● after applying the desired modifications, enable the EWF.

 

 

 

 

● press “start” button then “Run...” and type “ewfe”

 

 

● the ProScribe will logout and reboot automatically

 

 

● now the CF is write disable, so modification are not stored into the CF card, meaning that modifications will  

 

 

   be lost on reboot.

 

When the pad is powered on for the first time, the pad need to be calibrated.

 

See par. 8.1.0 for instructions.