Advance Security Inc R45 ユーザーズマニュアル

The Valet Mode allows you to temporarily turn off the passive arming function, eliminating the need

to give your transmitter to a parking attendant or garage mechanic. 

To enter the Valet Mode, follow these steps: 

1. Press the “Disarm” button on your transmitter to insure the device is disarmed (you will hear

2 beeps). 

2. Within 3 seconds of pressing the disarm button, press and release the “Valet On” button 3

times slowly. The device will emit 3 long beeps to indicate the Valet Mode is “On”. 

To exit the Valet Mode, follow these steps: 

1. Press the “Disarm” button on your transmitter (you will not hear any beeps). 

2. Within 3 seconds of pressing the disarm button, press and release the “Valet Off” button 3

times slowly. The device will emit 1 long beep to indicate the Valet Mode is “Off”. 

To enter the Valet Mode, follow these steps: 

1. Press the button on your transmitter to insure the device is disarmed (you will hear 2 beeps).
2. Within 3 seconds of pressing the button, turn ignition On/Off 3 times and wait about 3 seconds,

the device will emit 3 long beeps to indicate the Valet Mode is “On”.

To exit the Valet Mode turn the ignition On/Off 3 times and wait about 3 seconds, the device will emit
1 long beep to indicate the valet mode is “Off”.

4900-UM.qxp  4/1/05  16:19  Page 4