Advance Security Inc R49 ユーザーズマニュアル

2.  Push the Valet switch 3 times and hold in on the  3

 push; when a long chirp is 

heard then release the valet switch. You are now in the Transmitter programming 
mode.  

Program: 
1.  Press any button on the first transmitter until the siren responds with a confirming 

chirp; the first transmitter is now programmed.   

2.  Press any button on the second transmitter until the siren responds with a 

confirming chirp; the second transmitter is now programmed.   

3.   Apply the same procedure to program any 3rd and 4

th

 transmitters.

 

Exit:  Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps will 

confirm exit. 

Note: If more than 4 transmitters programmed, the system will only keep the last 4 

transmitters. 

 
ALARM FEATURE “I” PRORAMMING:   
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.  
2. Push the Valet switch 2 times and hold in on the 2

 push; when a long chirp is heard 

then release the valet switch. You are now in the Alarm feature  ‘I’ programming 
mode. 

3. Press the transmitter button corresponding to the feature you want to program.  

a. The factory default settings is always [1] LED flash, [1] chirp. 

4. Depress the transmitter button again to change the feature. Simply keep pressing 

the transmitter button again until the module advances to your desired setting. 

Press 
Transmitter 
Button 

One Chirp /  
LED one pulse 
Factory Default Setting 

Two Chirps / 
LED two pulse 
 

1 

 

Chirps on 

Chirps off 

2 

 

Automatic Rearm On  

Automatic Rearm Off 

3 

 

With Door Ajar error chirp 

Bypass Door Ajar error chirp. 

Exit:  Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps will confirm exit. 
 
 
 
 
 
 
 
 
 
 
 

ALARM FEATURE “II” PRORAMMING:  
1 

Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.  

2 

Push the Valet switch  4 times and hold in on the  4

  push; when a long chirp is 

heard, then release the valet switch. You are now in the Alarm feature  ‘II’ 
programming mode. 

3 

Press the transmitter button corresponding to the feature you want to program. 

Press 
Transmitter 
Button 

One Chirp /  
LED one pulse 
Factory Default 
Setting 

Two Chirps / 
LED two pulse 
 

Three Chirps / 
LED three pulse 
 

1 

 

0.9-second Door lock 
pulses. 

3.0-second Door lock 
pulse. 

Double pulse unlock