HeathCo LLC WLTRX3010 ユーザーズマニュアル
Welcome to Notifi by HeathZenith, the first video doorbell
system that doesn’t require batteries for the camera and
allows you to position the camera to best suit your needs.
This quick start guide will help setup the Notifi system.
For additional support, videos, and to download the full
manual, go to www.heath-zenith.com/notifi.
system that doesn’t require batteries for the camera and
allows you to position the camera to best suit your needs.
This quick start guide will help setup the Notifi system.
For additional support, videos, and to download the full
manual, go to www.heath-zenith.com/notifi.
Important Information
• Minimum system requirement for the Notifi app
• iOS 7.0 or higher
• Android 2.2 or higher.
• Android 2.2 or higher.
• The Notifi camera requires constant power to operate.
Whenever the power is turned on to the camera
(either for the first time or after a power outage), the
bulb requires a short 60-second boot-up period before
the camera will be fully operational.
(either for the first time or after a power outage), the
bulb requires a short 60-second boot-up period before
the camera will be fully operational.
• Not compatible with lights controlled by a:
• photocell (dusk-to-dawn operation)
• motion sensor
• dimmer
• timer
• motion sensor
• dimmer
• timer
You Will Need
• Password for your home network
• Broadband internet connection with home wi-fi router
• Phillips
screwdriver
• Flat-head
screwdriver
• Light fixture with medium base bulb
™
1
3
4
Setup the Notifi App and Camera
• IMPORTANT: Your home password will be required
during this process.
• Allow the bulb to fully boot-up.
• On your mobile device, go to Settings > Wi-Fi.
Select the “Notifi Video Doorbell” from the available
Wi-Fi networks.
Wi-Fi networks.
• Once connected, open the Notifi app. The app will
detect your new Notifi system.
• Select “YES” to start the setup and the app will guide
you through the remaining steps.
Install the Bulb
• IMPORTANT: Wait until step 5 to mount the camera.
• Turn the power OFF to the light fixture.
• Remove the existing bulb.
• Screw in the new Notifi bulb and camera until fully
seated in the light socket.
• Continue to rotate the bulb until the “Notifi” logo is
facing away from the house. The base of the bulb
will click during installation to allow the bulb to be
aligned properly.
will click during installation to allow the bulb to be
aligned properly.
• Turn the power ON to the light fixture – the bulb will
turn ON for 60-seconds and then turn OFF after the
boot-up period.
boot-up period.
• Remove the camera lens cap.
Know Your System
• Use the illustration below to get to know the different
components of your new Notifi system.
2
Download the Notifi App
•
See the enclosed cover letter for instructions on
how to download the Notifi app onto your device.
how to download the Notifi app onto your device.
Camera mounting bracket
Camera
Camera
lens
lens
Microphone
Lens cap
Camera
cable (22 in.)
cable (22 in.)
LED bulb
Speaker
'RZQORDGDFRPSOHWHPDQXDODWZZZKHDWK]HQLWKFRPQRWL´