HeathCo LLC WRC6032TX ユーザーズマニュアル

DRAFT COPY

ENGLISH

598-1302-00

Outdoor Wireless Motion
Sensor

This manual includes operating instructions for a variety of remote controlled products.
All products work on the same principle and use the same code setting information.
Please read all instructional information and note any specifi c information pertaining to
your particular product.

FEATURES

• Products are UL/cUL and/or FCC/IC tested and approved.
• Operational range of up to 100 feet.

Heath

/Zenith wireless lighting controls are designed to work together. Simply

determine which transmitter(s) you would like to have control which receiver(s)
and set the code setting to match.

CODE SETTINGS

Note: Most single system installations will not require any
change to the code setting. Transmitter(s) and receiver(s)
must have the same code and group setting to work together.
Switches 1 through 3 set the code. Switch 4 sets the Group
(A or B). See page 2 for switch locations.

Transmitter(s)/

Receiver(s) Code

Group “B”

Example 1 - Code Settings, System 1

(Factory Setting)

Transmitter(s)/

Receiver(s) Code

Group “A”

(

– Indicates Position of Switch)

Example 2 - Code Settings, System 2

Note: When operating more than one system independently of each
other, set each system to a different code. There are 8 codes avail-
able by changing the settings of switches 1 through 3.

Transmitter(s)/

Receiver(s) Code

Group “A”