HeathCo LLC WRC6033TX ユーザーズマニュアル
DRAFT COPY
ON
1 2 3
4
ON
1 2 3
4
ON
1 2 3
4
ENGLISH
Remote Controlled Products
This manual includes operating instructions for a variety of remote controlled products. All products work on the same principle and use the same
code setting information. Please read all instructional information and note any specific information pertaining to your particular product.
code setting information. Please read all instructional information and note any specific information pertaining to your particular product.
FEATURES
• Products are UL/cUL and/or FCC/IC tested and approved.
• Operational range of up to 100 feet.
• Operational range of up to 100 feet.
Heath
®
/Zenith wireless lighting controls are designed to work together. Simply determine which transmitter(s) you would like
to have control which receiver(s) and set the code setting to match.
CODE SETTINGS
Note: Most single system installations will not require any
change to the code setting. Transmitter(s) and receiver(s)
must have the same code and group setting to work together.
Switches 1 through 3 set the code. Switch 4 sets the Group
(A or B). See page 2 for switch locations.
change to the code setting. Transmitter(s) and receiver(s)
must have the same code and group setting to work together.
Switches 1 through 3 set the code. Switch 4 sets the Group
(A or B). See page 2 for switch locations.
Transmitter(s)/
Receiver(s) Code
Group “B”
Example 1 - Code Settings, System 1
(Factory Setting)
Transmitter(s)/
Receiver(s) Code
Group “A”
(
– Indicates Position of Switch)
Example 2 - Code Settings, System 2
Note: When operating more than one system independently of each
other, set each system to a different code. There are 8 codes avail-
able by changing the settings of switches 1 through 3.
other, set each system to a different code. There are 8 codes avail-
able by changing the settings of switches 1 through 3.
Transmitter(s)/
Receiver(s) Code
Group “A”
© 2006 DESA Specialty Products™
598-11271-00
CODE SWITCH LOCATIONS
Solar Powered Motion Sensor
Code
Switches
ON
D
UAL
B
RITE®
ON-TIME
Off 3Hr Dusk to TEST 1 5
Dawn
(Mins)
CODE
RANGE
DETECT
1 2 3 4
MIN
MAX NIGHT DAY
ONLY NIGHT
ON
1 2 3
4
Close-Up of Typical Code Switch
(Factory Default Setting is Off)
Note: The “X” has been placed on the switches to help clarify the
code settings on the previous page.