Model Rectifier Corporation 02400 ユーザーズマニュアル

80 New

field Avenue

Edison, NJ 08837-3817

ww

w.modelr

ectifier.com

Do not tamper or modify any of the Light Genie™ components.  Keep 

instructions for later use.

Light Genie™ includes the  following; Genie Receiver Board,  Lighting Plugs, 

Power Plug, and Wireless Transmitter.  Combined with any light on your 

project, wireless radio control and lighting effects are easily commanded.

Use the Light Genie™ plugs provided and connect with any desired LED/Bulb 

fixture you wish to use with your project.

LED’s are directional.  Please be sure the positive leg is connected to the blue 

wire (common wire).

Simply take the lead wires from the Light Genie™ plug and leads from your 

lighted accessory, twist the leads together.  Make sure the copper strands 

have a solid interlocking twist.  Wrap the connection in electrical tape for 

insulation & to prevent a short circuit.  Soldering may be used for a more 

permanent connection.

Plug the Light Genie™ Plugs into the Genie Receiver.  (Fig 2)

Shared Common Wire

Shared Common Wire

To Lighting Output To Lighting Output To Lighting Output

To Lighting Output

To Lighting Output

 (Fig 2)

Each Zone has the ability to be remotely turned on or off, adjusted for brightness, 

and set to one of over 20 different lighting effects. (Fig 1.)

Lighting effects to select from: Constant on, flashing, strobe effect, sequential 

lighting, flickering, and more.. There are more than 20 lighting effects to choose 

from.  See enclosed chart.

Zone 1 controls outputs 1 and 2 - (2 Outputs)

Zone 2 controls outputs 3 and 4 - (2 Outputs)

Zone 3 controls outputs 5 and 6 - (2 Outputs)

Zone 4 controls outputs 7, 8 and 9 - (3 Outputs)

Zone 5 controls outputs 10, 11 and 12 - (3 Outputs)

1 – Genie R

eceiver

1 – Genie T

ransmitt

er Remot

e

1 – 2-Pin P

ow

er Connector w/Leads

3 – 3-Pin Connect

ors w/Leads

2 – 4-Pin Connect

ors w/Leads

2 – Moun

ting Screw

s

1 – V

elcro Strip

2 – AAA Ba

tteries

12 – R

esistor

s for LEDs and 3.5v Bulb

s

 (Fig 1)

Light Genie™ R

eceiver

Maximum Output = 1 Amp/Ligh

t Genie™ Receiv

er

Input = 12v/Maximum = 18v

Maximum 100mA per Output Channel/12v per Output

WARNING: Only Use 12-16V (30mA) Inc

andescent Bulb

s

Supplied Resis

tor

s = 470 ohm each

* Light Genie™ is equipped with a pow

er regula

tor t

o prot

ect your ligh

ts. Using a higher volt

age po

wer 

supply (beyond 13v), will NO

T increase the brigh

tness of any ligh

ts.

Remot

e Transmitt

er = 90' Operational Rang

e

Incandescen

t Bulb Specifications & LED Specific

ations

Up to 24 Bulb

s with Series wiring (12-14v – 30 mA)

Up to 48 LEDs/3.5v Bulb

s with Series wiring (20 mA)

Resis

tor Usag

e for LED

’s and 3.5v Inc

andescent Bulb

s

One to Thr

ee LEDs/3.5v Bulb in a Series (per Output) – One Resis

tor R

equired

Four LEDs/3.5v Bulb in a Series (per Output) – NO R

esistor R

equired

A combina

tion of bulbs and LED

’s ma

y be used.  Perf

ormance may v

ary based on pr

oject 

con

figurations.

Some LED’s c

ome with a resis

tor pr

e-wired.  Using multiple LEDs in a series will r

esult in 

dimmer lighting.  T

o increase brigh

tness, remo

ve their r

espective r

esistor(s) t

o make them 

brighter

.  Keep in mind, one is s

till requir

ed as mentioned pr

eviously

.

Light Genie™ surf

aced mounted LED

’s c

ome with a built in resis

tor

, but can easily be 

con

figured t

o operat

e without, so that the

y may be used in a series.

DCC Notes

Light Genie™ is DCC equipped, and does not need an additional dec

oder purchase.  See our 

web

site f

or more in

forma

tion about DCC usage and additional f

eatur

es.

No. 025001

 – Multi-Action Transmitter w/LCD (Control 4 Receivers)

No. 025201

 – 1 Amp AC Power Supply

No. 025300

 – LED Red (4 Pack)

No. 025301

 – LED Bright White (4 Pack)

No. 025302

 – LED Golden White (4 Pack)

No. 025303

 – LED Amber (4 Pack)

No. 025320

 – LED Mini White (4 Pack)

No. 025321

 – LED Mini Red (4 Pack)

No. 025322

 – LED Mini Amber (4 Pack)

No. 025323

 – LED Mini Green (4 Pack)

No. 025100

 – 3 Pin Connectors w/ 10” Leads (6 Pack)

No. 025101

 – 4 Pin Connectors w/ 10” Leads (2 Pack)