Model Rectifier Corporation ATH49M ユーザーズマニュアル
Universal Wireless Remote Control For Use In Model Rail Roading Application
Application:
5 Remote controls outputs can be used to control Building lights, Slow Motion Switch Machines, Triggering
sound unit. It can also be used to remote control any model rail roading accessory which need 3.6 - 5.5 V to
operate. within 10 feet.
sound unit. It can also be used to remote control any model rail roading accessory which need 3.6 - 5.5 V to
operate. within 10 feet.
Transmitter:
Powered by A23 (12V) battery. It has a power switch and 6 push buttons.
Reciever:
Powered by 3.6-5.5 VDC
Operation:
Press and hold buttons #1 on the transmitter. The output #1 on the receiver will output high voltage (3.6 - 5.5V
depends on the receiver’s DC power supply). Release button #1 on the transmitter. The output #1 on the
receiver will output 0 volt. Press and hold button #2 to #5. The output #4 to #5 will output high voltage (3.6 -
5.5V) respectively. Press and hold button #6. The output #4 and #5 will output high voltage (3.6 - 5.5V) at the
same time.
depends on the receiver’s DC power supply). Release button #1 on the transmitter. The output #1 on the
receiver will output 0 volt. Press and hold button #2 to #5. The output #4 to #5 will output high voltage (3.6 -
5.5V) respectively. Press and hold button #6. The output #4 and #5 will output high voltage (3.6 - 5.5V) at the
same time.
Operation Range:
3 meter
+5V
Output 3
LED
Output 5
Output 4
Output 2
Output 1
GND
Receiver
Antenna
Transmitter
1
5
4
3
2
6
off
on
+5V
GND
200
200
200
200
200
200
LED3
LED2
LED4
LED5
LED1
Example of control five LED