HM Electronics Inc COM6K ユーザーズマニュアル
HM ELECTRONICS, INC.
14110 Stowe Drive, Poway, CA 92064 USA • Phone: 1-800-848-4468 Fax: (858) 552-0172
HME# 400G547
Rev C 2/8/10
COM6K
COMMUNICATOR
COMMUNICATOR
COMMUNICATOR
COMMUNICATOR
®
REGISTRATION INSTRUCTIONS
These instructions include registration of the COM6K with both the Wireless IQ™ and ionIQ™ systems.
Prior to operation of the drive-thru audio system, each Communicator must be registered for use with a
specific base station. The base station will then recognize all registered Communicators when their
power is on, differentiating between them and interfering transmissions from other electronic equipment
operating on similar frequencies.
•
•
•
•
A maximum of 15 Communicators can be registered.
•
•
•
•
If a new Communicator is received, or one is returned from repair, it must be registered.
•
•
•
•
When a Communicator is replaced, the old one remains in memory.
•
•
•
•
If the maximum number of 15 Communicators (in memory) is exceeded, some or all current
registrations may need to be cleared before registering others.
registrations may need to be cleared before registering others.
•
•
•
•
Communicators must be within 6 feet (1.83 meters) of the base station while being registered.
•
•
•
•
All Communicators to be registered must be powered off and the base station powered on. Other
Communicators can be either on or off.
Communicators can be either on or off.
Figure 2. Registration controls on Communicator
Channel “A1”
button
Channel “B”
button
Channel “A2”
button
Power
button
button
Figure 1. Wireless IQ
™
and ionIQ
™
base stations
Wireless IQ
™
base station ionIQ
™
base station
If your base station looks like this If your base station looks like this
go to page 2 go to page 3
for registration instructions for registration instructions
go to page 2 go to page 3
for registration instructions for registration instructions