Honeywell DR4201 ユーザーズマニュアル

The DigiReader DR4200 Series Digital Proximity Readers (DigiReaders) are security devices that
reads digital credentials at ranges from 1 to 36 inches (2½ to 91 cm) depending upon the model and
the environmental conditions. DR4200 Series DigiReaders are bi-directional, so that a credential can
be read from either side of the sensor. DR4200 Series DigiReaders are used with the NexSentry 4100
Family, SE818SC and SE422 ACUs operating as stand-alone devices or in conjunction with a
NexSentry Manager, an SE6000 (a NexSentry Command Center NSCC) or an SE5850, (WSE
access control host systems). Connection between DigiReaders and an ACU is over the WSE
proprietary S-Net interface or over a Wiegand interface to a Wiegand ACU. The Wiegand data can
be either 26- or 34-bit Wiegand standard.

CAUTION 1.

  

 Read this manual carefully before attempting to wire in place a DR4200 Series

DigiReader. The warranty is void if damage occurs to the unit as a result of
incorrect wiring.

CAUTION 2.   The information in this manual is not intended to conflict with the building codes,

electrical codes, fire codes, or safety codes required for any given installation.
In all cases, the prevailing building codes must take precedence.