TriGem Computer Inc BLACKCRYSTAL ユーザーズマニュアル

3. Removing the dummy board from the MXM socket

Remove the screws that secure the dummy board and then remove the dummy board from the

MXM socket. (Please do not discard this dummy board. If you don’t want to use the MXM video

card, you must install this dummy board in the MXM socket.)

4. Installing the MXM video card

Insert the MXM video card firmly and secure it with the screws as shown in the figure.

5. Replacing the CPU thermal module

Replace the CPU thermal module and the CPU fan cable, then replace the screws.

6. Replacing the stand, left side cover, and CD drive

Refer to the steps from 5 to 7 on “Expanding the Main Memory” for replacing the stand, left

side cover, and CD drive.